This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Shaft size: 3/4" fine spline without flat at bolt head side
Spline count: 32
Total OD: 3-5/32"
Bolt size: 5/16"
Bolt spacing: 2-3/8" center to center
Pin diameter: 5/16" & 3/8"
Pin spacing: 2-1/2" center to…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Reproduction Of Original (3) Hardened Hex Head Bolts (3) Hardened Beveled Washers Attaches Steering Box To Subframe Works With Delphi Fast Ratio Steering Boxes This steering box bolt set attaches the steering box to the front subframe of…
Ensure a secure and stable steering system with this mounting bolt and washer set, designed for 1970-1981 Chevrolet Camaro models. This factory-correct set provides the necessary hardware to attach the steering box to the frame, ensuring…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with…
This steering column coupler commonly known as the rag joint can be a weak link between the steering column and the steering gear box. When the coupler becomes worn, it can lead to future problems with your steering system and expensive…
Comes as a complete unit and ready-to-install. This includes both pieces of the coupler, the rag joint to go between them and all the necessary hardware. 36-spline.Power Steering Box Coupler Without Tilt, 13/16".…
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look
Each component is carefully inspected and replaced if not to OE tolerances
All seals and O-rings are replaced with OE equivalent…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Restoration Correct Correct Fit Fits Inline 6 And V8 Engines For Gear With Ring Retaining Housing In many cases when the gear assembly is leaking on your 1965-1977 Chevelle or Malibu it's not a failed gear assembly, but a simply a leaking…
Borgeson OEM Saginaw 525 series manual steering boxes are the true OEM gears built to the original specifications and drawings from Saginaw, not an off-shore copy. Each gear features a precision machined casting created from the original…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
New Manual Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and filled with a high quality grease, ready for installation. All units are carefully packaged to insure safe arrival at your door. Backed…
New Power Steering Gears are engineered to OE specifications. Each unit is inspected, adjusted and hydraulically tested. All units are carefully packaged to insure safe arrival at your door. Backed with a Limited Lifetime Warranty…
Stock Replacement Seal Replaces lower Shaft Seal On Original Steering Boxes Picture In 1959-60 Steering Box Rebuild Parts Diagram In Catalog As Number 6 This stock replacement steering box lower shaft seal is manufactured by GM or by one…
Restoration Correct Original AC Delco Part Correct Fit Fits Inline 6, V6 And V8 Engines For Gear With Ring Retaining Housing Made In USA In many cases when the gear assembly is leaking on your 1965-1984 El Camino it's not a failed gear…
Stock Replacement Gasket Replaces Cast Steering Box Cover To Housing Picture In 1959-60 Steering Box Rebuild Parts Diagram In Catalog As Number 1 This stock replacement steering box cover gasket is manufactured by GM or by one of its…
Provides Near Rack & Pinion Road Feel Easy Bolt-On Installation This Kit Includes Steering Box And Bolts Now you can have rack and pinion steering performance in a bolt-on steering box. This is an all new unit and will give you better…
Provides Near Rack & Pinion Road Feel Easy Bolt-On Installation Includes Steering Box, Coupler, Bolts And Steering Box Fittings Replace Worn Original Bolts With P/N 07-8356 For Best Fit Now you can have rack and pinion steering…
Provides Near Rack & Pinion Road Feel Easy Bolt-On Installation Includes Steering Box, Coupler, Bolts And Steering Box Fittings Replace Worn Original Bolts With P/N 07-8356 For Best Fit Now you can have rack and pinion steering…
3/4 X 30 Rag Joint 3.25" in DiameterThe RJC-730R Rag Joint Coupler features a diameter of 3.25" and a 3/4 x 30 spline connection. When rebuilding or modifying your steering system, replacing the worn factory steering shaft coupler, or "rag…
1958-64 Chevy Fullsize, Fits Most Radiators, Column Shaft Modifications or Replacement Needed, 14-1 Ratio, 3.5 Turn to Turn, 34 x 30 SplinedThe CP50003-2 500 Series Power Steering Conversion Box 1958-1964 Chevy Full Size features…
16MM O-ring Male to 5/8 x 18 Female Flare & 18MM O-ring Male to 11/16 x 18 Female FlareThe 605SOL Fitting Kit is specifically designed to convert a post-1979 metric GM gearbox or pump to pre-1979 American flare fittings.…