Provides 41% More Coolant Flow Than Original Water Pump
Reduces Engine Temperature Up To 40º
F
Dark Cast Iron
Finish
Requires Robert Shaw Hi-Flow Thermostat
Beat the heat with this polished aluminum Stewart hi-flow water pump. Your Chevelle's engine will run up to 40ºF cooler due to internal modifications on this water pump that produce an impressive 41% more coolant flow. It uses new, original equipment castings for a bolt-on fit and is compatible with all factory brackets. Must be used with Robert Shaw 180ºF hi-flow thermostat. Manufacturer's 1-year warranty.
Note: The Short And Long Of Chevy Water Pumps
Chevelle mechanical short style water pumps measure 5-5/8” high from the shaft down with the pilot shaft diameter measuring 5/8". Long style Chevelle water pumps measure 7” high from the shaft down, and the pilot shaft diameter was 5/8" as well. Do not mix and match pulleys from short and long water pump engines because this will cause pulley misalignment. An easy way to find out what style you have while your pump is still installed on the engine is to try to stick your hand between the water pump and timing chain cover. If you can slip your fingers in-between you have a long, if not you have a short.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
